Quick start manual

Nero ShowTime ‘Settings’ Dialogue Window • 12
Two algorithms are available as de-interlacing options.
If the ‘Weave’ algorithm is enabled, the de-interlacing procedure is processed
using the computer’s performance, so that, depending on the processor, images
may pile up. You can use step-by-step control and the ‘Fine-tuning’ option field to
set the best image quality yourself. This method provides better image quality,
but takes up a lot of processor performance. If you have deactivated the
hardware acceleration, no ‘Weave’ de-interlacing is possible.
If the ‘Bob’ algorithm is enabled, the de-interlacing procedure is assumed by the
hardware. This method is primarily recommended to users with older PC’s with
less than 600 MHz of processor performance.
If you would like detailed information on the subject of interlacing / de-interlacing,
we recommend: ‘http://www.dvddemystified.com’, where you will find a great deal
of information on the subject.
3.3 Skin browser
Nero ShowTime makes it possible for you to adjust graphic interfaces.
 Select skin
This shows the skins that may be selected for your Nero ShowTime. Click with
the left mouse key on a skin and an image will appear in the preview window.
 Skin folder
This determines the folder in which your masters are installed.
Two files are required for a skin to be loaded into Nero ShowTime: A file ending
in *.skn (such as Blue_Skin.skn) and an *.bmp file that must have the same name
as the associated *.skn file (such as Blue_Skin.bmp).