HP LaserJet Enterprise 500 Color MFP M575 - Load Tray 2

ManualsBrandsHP ManualsPrint & ScanCD644A

HP LaserJet Enterprise

500 color MFP M575

Tray 2

Tray capacity and paper orientation

To prevent jams, do not overfill trays. Be sure the top of the stack is below the tray-full indicator. For short/narrow

and heavy/glossy paper, load paper to less than half of the tray-full indicators.

Table 3-4 Tray 2 capacity

Paper type Specifications Quantity

Paper Range:

60 g/m

(16 lb) to 220 g/m

(58 lb)

Equivalent to 250 sheets of 75 g/m

(20 lb)

Maximum stack height: 25 mm (.98 in)

For A5, A6, and 4x6 paper sizes, and for paper

printed in a landscape orientation the maximum stack

height is 15 mm (.59 in),

Transparencies Minimum: 0.102 mm (0.004 in) thick Maximum stack height: 25 mm (.98 in)

Glossy paper Range:

105 g/m

(28 lb) to 220 g/m

(58 lb)

100 sheets

Table 3-5 Tray 2 paper orientation

Paper type Image

orientation

Duplex mode How to load paper

Alternative Letterhead

Mode = Disabled

How to load paper

Alternative Letterhead

Mode = Enabled

Preprinted or

letterhead

Portrait 1-sided printing Face-up

Top edge at the right side of the

tray

Face-up

Top edge at the right side of the

tray

Company, L.P.

1 www.hp.com/support/lj500colorMFPM575

Summary of content (5 pages)

PAGE 1
HP LaserJet Enterprise 500 color MFP M575 Tray 2 Tray capacity and paper orientation To prevent jams, do not overfill trays. Be sure the top of the stack is below the tray-full indicator. For short/narrow and heavy/glossy paper, load paper to less than half of the tray-full indicators. Table 3-4 Tray 2 capacity Paper type Specifications Quantity Paper Range: Equivalent to 250 sheets of 75 g/m2 (20 lb) 60 g/m2 (16 lb) to 220 g/m2 (58 lb) Maximum stack height: 25 mm (.
PAGE 2
Table 3-5 Tray 2 paper orientation (continued) Paper type Image orientation Duplex mode 2-sided printing Landscape 1-sided printing 2-sided printing Prepunched Portrait or landscape HP LaserJet Enterprise 1- or 2-sided printing How to load paper How to load paper Alternative Letterhead Mode = Disabled Alternative Letterhead Mode = Enabled Face-down Face-down Top edge at the left side of the tray Top edge at the left side of the tray Face-up Face-up Top edge toward the back of the produc
PAGE 3
Load Tray 2 This tray holds up to 250 sheets of 75 g/m2 (20 lb) paper. If the paper is heavier, the tray does not hold as many sheets. Do not overfill the tray. CAUTION: Do not print envelopes, labels, postcards, or unsupported sizes of paper from Tray 2. Print these types of paper only from Tray 1. 1. Slide open the tray. NOTE: use. Do not open the tray while it is in 2.
PAGE 4
. Slide the tray into the product. 5. The control panel shows the tray’s paper type and size. If the configuration is not correct, follow the instructions on the control panel to change the size or type. 6. For custom-size paper, you need to specify the X and Y dimensions for the paper Y X Automatic paper sensing (auto-sense mode) The automatic paper type sensor functions when a tray is configured to the Any Type or plain type setting.
PAGE 5
Expanded sensing NOTE: trays. This is the default setting for all Transparency only For the first few sheets of paper that it picks up from the tray, the product detects light paper, plain paper, heavy paper, glossy paper, tough paper, and transparencies. The product assumes the rest of the pages are of the same type. The product distinguishes between transparencies and non-transparencies. This setting provides the fastest printing, but for some paper types it might reduce print quality.