HP LaserJet Enterprise 500 Color MFP M575 - Load Tray 2

Load Tray 2

This tray holds up to 250 sheets of 75 g/m

(20 lb) paper. If the paper is heavier, the tray does not hold as many

sheets. Do not overfill the tray.

CAUTION: Do not print envelopes, labels, postcards, or unsupported sizes of paper from Tray 2. Print these

types of paper only from Tray 1.

1. Slide open the tray.

NOTE: Do not open the tray while it is in

use.

2. Adjust the paper-length and paper-width

guides by squeezing the adjustment latch and

sliding the guides to the size of the paper

being used.

3. Load paper into the tray face-up. Check the

paper to verify the guides lightly touch the

stack, but do not bend it.

NOTE: To prevent jams, do not overfill the

tray. Be sure the top of the stack is below the

tray full indicator.

NOTE: If the tray is not adjusted correctly,

an error message might display during printing

or the paper might jam.

Company, L.P.

3 www.hp.com/support/lj500colorMFPM575