HP LaserJet Enterprise 500 Color MFP M575 - Load Tray 2

4. Slide the tray into the product.

5. The control panel shows the tray’s paper type

and size. If the configuration is not correct,

follow the instructions on the control panel to

change the size or type.

6. For custom-size paper, you need to specify the

X and Y dimensions for the paper

Automatic paper sensing (auto-sense mode)

The automatic paper type sensor functions when a tray is configured to the Any Type or plain type setting.

After it has picked up paper from the tray, the product can detect overhead transparencies, paper weight, and

gloss level.

For more control, select a specific paper type for the job or configure the tray for a specific paper type.

Auto-sense settings

1. From the Home screen on the product control panel, scroll to and touch the Administration button.

2. Open the following menus:

●

General Settings

●

Print Quality

●

Auto Sense Behavior

3. Select one of the auto-sense modes.

HP LaserJet Enterprise 4