HP LaserJet Enterprise 500 Color MFP M575 - Load Tray 1

ManualsBrandsHP ManualsPrint & ScanCD645A

HP LaserJet Enterprise

500 color MFP M575

Tray 1

Tray capacity and paper orientation

To prevent jams, do not overfill trays. Be sure the top of the stack is below the tray-full indicator. For short/narrow

and heavy/glossy paper, load paper to less than half of the tray-full indicators.

Table 3-2 Tray 1 capacity

Paper type Specifications Quantity

Paper Range:

60 g/m

(16 lb) to 220 g/m

(58 lb)

Maximum stack height: 10 mm (0.39 in)

Equivalent to 100 sheets of 75 g/m

(20 lb)

Envelopes

Less than 60 g/m

(16 lb) to 90 g/m

(24 lb)

Up to 10 envelopes

Labels Maximum: 0.102 mm (0.004 in) thick Maximum stack height: 10 mm (0.39 in)

Transparencies Minimum: 0.102 mm (0.004 in) thick Maximum stack height: 10 mm (0.39 in)

Up to 50 sheets

Glossy paper Range:

105 g/m

(28 lb) to 220 g/m

(58 lb)

Maximum stack height: 10 mm (0.39 in)

Up to 50 sheets

Table 3-3 Tray 1 paper orientation

Paper type Image

orientation

Duplex mode How to load paper

Alternative Letterhead

Mode = Disabled

How to load paper

Alternative Letterhead

Mode = Enabled

Preprinted or

letterhead

Portrait 1-sided printing Face-down

Top edge leading into the

product

Face-up

Bottom edge leading into the

product

Company, L.P.

1 www.hp.com/support/lj500colorMFPM575

Summary of content (6 pages)

PAGE 1
HP LaserJet Enterprise 500 color MFP M575 Tray 1 Tray capacity and paper orientation To prevent jams, do not overfill trays. Be sure the top of the stack is below the tray-full indicator. For short/narrow and heavy/glossy paper, load paper to less than half of the tray-full indicators. Table 3-2 Tray 1 capacity Paper type Specifications Quantity Paper Range: Maximum stack height: 10 mm (0.
PAGE 2
Table 3-3 Tray 1 paper orientation (continued) Paper type Image orientation Duplex mode 2-sided printing Landscape 1-sided printing 2-sided printing Prepunched Portrait or landscape HP LaserJet Enterprise 1- or 2-sided printing How to load paper How to load paper Alternative Letterhead Mode = Disabled Alternative Letterhead Mode = Enabled Face-up Face-up Bottom edge leading into the product Bottom edge leading into the product Face-up Face-up Top edge toward the front of the product To
PAGE 3
Table 3-3 Tray 1 paper orientation (continued) Paper type Envelopes Image orientation Duplex mode Long edge of the envelope feeding into the product 1-sided printing Short edge of the envelope feeding into the product 1-sided printing How to load paper How to load paper Alternative Letterhead Mode = Disabled Alternative Letterhead Mode = Enabled Face-down Not applicable Top edge leading into the product Not applicable Face-down Top edge toward the back of the product Load Tray 1 1.
PAGE 4
2. Slide out the tray extension. 3. Fold out the tray extension to support the paper and open the side guides. 4. Load paper in the tray face-down and the short, top edge going into the product first. HP LaserJet Enterprise 4 www.hp.
PAGE 5
. Make sure the stack fits under the tabs on the guides and does not exceed the tray-full indicators. 6. Adjust the side guides so that they lightly touch the paper stack but do not bend it. © Copyright Hewlett-Packard Development Company, L.P. 5 www.hp.
PAGE 6
Print envelopes If your software does not automatically format an envelope, specify Landscape for page orientation in your software program or print driver. Use the following guidelines to set margins for return and destination addresses on Commercial #10 or DL envelopes: Address type Left margin Top margin Return 15 mm (0.6 in) 15 mm (0.6 in) Destination 102 mm (4 in) 51 mm (2 in) For envelopes of other sizes, adjust the margin settings accordingly.