HP LaserJet Enterprise Color Flow MFP M575 - User Guide

Use advanced image processing features for
copying
You can use the product to enhance scanned images in several ways.
Sharpness adjustment for copies
Adjust the Sharpness setting to clarify or soften the image. For example, increasing the sharpness could
make text appear crisper, but decreasing it could make photos appear smoother.
1. From the Home screen on the product control panel, touch the Copy button.
2. Touch the Image Adjustment button.
NOTE: If the button is not on the first page of options, touch the More Options button at the
bottom of the screen.
3. Adjust the Sharpness slider to the left to decrease the sharpness, or adjust it to the right to increase
the sharpness.
4. Touch the OK button to save the changes.
5. Touch the Start
button to begin scanning.
Erase edges for copies
Use the Erase Edges feature to remove blemishes, such as dark borders or staple marks, by cleaning
the edges of the scanned image.
1. From the Home screen on the product control panel, touch the Copy button.
2. Touch the Erase Edges button.
NOTE: If the button is not on the first page of options, touch the More Options button at the
bottom of the screen.
3. If necessary, change the unit of measure by selecting the Use inches box or the Use millimeters
box.
4. Touch the field for an edge of the image that you want to clean, and then enter the distance from
the edge of the page to clean. Repeat this step for each edge that you want to clean.
5. Touch the OK button to save the changes.
6. Touch the Start
button to begin scanning.
Automatic color detection for copies
Use the Color/Black feature to configure the color settings that the product uses for scanned images.
The following options are available:
126 Chapter 6 Copy ENWW