User's Manual

Maintain the All-in-One

Clean the All-in-One

CAUTION: Unplug the battery from the All-in-One before doing any cleaning procedure.

CAUTION: Never spray or douse the All-in-One with any liquid. Use only dampened wipes, cloths,

or swabs to clean the All-in-One.

IMPORTANT: Use only materials from the list below to clean the All-in-One (see "Cleaning

materials," below). Other solvents or cleaners may damage the plastic, paint, or the adhesives

used in the All-in-One.

Cleaning materials

The following materials may be used to clean the All-in-One:

• Cotton cloths

• Alcohol wipes

• Cotton swabs

• Baby wipes

• Deionized water

• Isopropyl alcohol

• Eyeglass cleaning wipes (anti-static and anti-fog types only)

Clean outside surfaces

Use a cotton cloth dampened with water to clean the outside surfaces of the All-in-One.

• To remove difficult material, such as gummy adhesive or built-up grime, use a cotton cloth

dampened with isopropyl alcohol or an alcohol wipe, and dry with a dry cotton cloth.

• To clean hard-to-reach places, such as the cooling ribs of the case, use cotton swabs

dampened with isopropyl alcohol.

Clean the imager window

Use eyeglass cleaning wipes to clean the imager window. Eyeglass cleaning wipes provide the best

anti-glare cleaning solution.

○ Be sure to wipe away any build-up from the center area of the imager window.

○ Cotton swabs may be used to lightly remove smudges from the window edges.

NOTE: If eyeglass cleaning wipes are not available, use a cotton swab dampened with isopropyl

alcohol to clean the imager window.