User's Manual

Maintain the All-in-One

Clean the wrist case and hand mount

1. Use an alcohol wipe or a cotton cloth dampened with deionized water to scrub all areas of the

hand mount, straps, and wrist case that have come into direct contact with the skin.

2. Use a second alcohol wipe or cotton cloth dampened with deionized water to wipe affected

areas.

Clean the door

To clean the opening in the door, do the following:

IMPORTANT: Do not touch the metal contacts or the ink nozzles.

1. Remove the print cartridge from the door.

2. Use a dry cotton cloth to remove the ink-soaked fibers from the opening in the door.

3. If the ink is too dry to easily remove the fibers, use a cotton swab dampened with deionized

water or isopropyl alcohol to break down the ink buildup.

Charge the battery

To charge batteries, follow the instructions that came with your battery charger.

Remove the hand mount or handle accessory

1. Squeeze both of the release buttons on the back of the hand mount.

2. Slide the hand mount backward, off of the All-in-One.

1 Release button

IMPORTANT: If you are using the handle accessory instead of the hand mount, see the

instructions that were included with the handle accessory.