HP LaserJet Professional P1100 Printer series - User Guide
Table Of Contents
- Product basics
- Software for Windows
- Use the product with Mac
- Connect the product
- Paper and print media
- Print tasks
- Cancel a print job
- Print with Windows
- Open the Windows printer driver
- Get help for any print option with Windows
- Change the number of print copies with Windows
- Print colored text as black with Windows
- Save custom print settings for reuse with Windows
- Improve print quality with Windows
- Print the first or last page on different paper with Windows
- Scale a document to fit page size with Windows
- Add a watermark to a document with Windows
- Print on both sides (duplex) with Windows
- Create a booklet with Windows
- Print multiple pages per sheet with Windows
- Select page orientation with Windows
- Use HP ePrint
- Manage and maintain the product
- Solve problems
- Supplies and accessories
- Service and support
- Specifications
- Environmental product stewardship program
- Protecting the environment
- Ozone production
- Power consumption
- Toner consumption
- Paper use
- Plastics
- HP LaserJet print supplies
- Paper
- Material restrictions
- Disposal of waste equipment by users (EU and India)
- Electronic hardware recycling
- Brazil hardware recycling information
- Chemical substances
- Product Power Data per European Union Commission Regulation 1275/2008
- Restriction on Hazardous Substances statement (India)
- Restriction on Hazardous Substances statement (Turkey)
- Restriction on Hazardous Substances statement (Ukraine)
- Substances Table (China)
- SEPA Ecolabel User Information (China)
- The regulation of the implementation on China energy label for printer, fax, and copier
- Material Safety Data Sheet (MSDS)
- EPEAT
- For more information
- Regulatory information
- Declaration of Conformity (HP LaserJet Professional P1102, P1102s, P1106, P1108, and P1109)
- Declaration of Conformity (HP LaserJet Pro P1102w and P1109w)
- Regulatory statements
- Additional statements for wireless products
- FCC compliance statement—United States
- Australia statement
- Brazil ANATEL statement
- Canadian statements
- Exposure to Radio Frequency Radiation (Canada)
- European Union regulatory notice
- Notice for use in Russia
- Mexico statement
- Taiwan statement
- Korean statement
- Vietnam Telecom wired/wireless marking for ICTQC Type approved products
- Index
The product name does not appear in the product list in the Printer Setup Utility or Print & Fax list.
Cause Solution
The product might not be ready. Make sure that the cables are connected correctly, the product is on, and
the ready light
is on.
The wrong product name is being used. Print a configuration page to check the product name. Verify that the
name on the configuration page matches the product name in the Printer
Setup Utility or the Print & Fax list.
The interface cable might be defective or of poor quality. Replace the cable with a high-quality cable.
The printer driver does not automatically set up the selected product in the Printer Setup Utility or the Print & Fax list.
Cause Solution
The product might not be ready. Make sure that the cables are connected correctly, the product is on, and
the ready light
is on.
The product software might not have been installed or was installed
incorrectly.
Make sure that the product PPD is in the following hard-drive folder:
●
Mac OS X v10.4: Library/Printers/PPDs/Contents/
Resources/<lang>.lproj, where <lang> is the two-letter
language code for the language that you are using.
●
Mac OS X v10.5 and v10.6: Library/Printers/PPDs/
Contents/Resources
If necessary, reinstall the software. See the getting started guide for
instructions.
The Postscript Printer Description (PPD) file is corrupt. Delete the .GZ file from the following hard-drive folder:
●
Mac OS X v10.4: Library/Printers/PPDs/Contents/
Resources/<lang>.lproj, where <lang> is the two-letter
language code for the language that you are using.
●
Mac OS X v10.5 and v10.6: Library/Printers/PPDs/
Contents/Resources
Reinstall the software. See the getting started guide for instructions.
The interface cable might be defective or of poor quality. Replace the interface cable with a high-quality cable.
A print job was not sent to the product that you wanted.
Cause Solution
The print queue might be stopped. Restart the print queue. Open print monitor and select Start Jobs.
The wrong product name is being used. Another product with the same
or similar name might have received your print job.
Print a configuration page to check the product name. Verify that the
name on the configuration page matches the product name in the Printer
Setup Utility or Print & Fax list.
94 Chapter 8 Solve problems ENWW