HP LaserJet Professional P1100 Printer series - User Guide
Table Of Contents
- Product basics
- Software for Windows
- Use the product with Mac
- Connect the product
- Paper and print media
- Print tasks
- Cancel a print job
- Print with Windows
- Open the Windows printer driver
- Get help for any print option with Windows
- Change the number of print copies with Windows
- Print colored text as black with Windows
- Save custom print settings for reuse with Windows
- Improve print quality with Windows
- Print the first or last page on different paper with Windows
- Scale a document to fit page size with Windows
- Add a watermark to a document with Windows
- Print on both sides (duplex) with Windows
- Create a booklet with Windows
- Print multiple pages per sheet with Windows
- Select page orientation with Windows
- Use HP ePrint
- Manage and maintain the product
- Solve problems
- Supplies and accessories
- Service and support
- Specifications
- Environmental product stewardship program
- Protecting the environment
- Ozone production
- Power consumption
- Toner consumption
- Paper use
- Plastics
- HP LaserJet print supplies
- Paper
- Material restrictions
- Disposal of waste equipment by users (EU and India)
- Electronic hardware recycling
- Brazil hardware recycling information
- Chemical substances
- Product Power Data per European Union Commission Regulation 1275/2008
- Restriction on Hazardous Substances statement (India)
- Restriction on Hazardous Substances statement (Turkey)
- Restriction on Hazardous Substances statement (Ukraine)
- Substances Table (China)
- SEPA Ecolabel User Information (China)
- The regulation of the implementation on China energy label for printer, fax, and copier
- Material Safety Data Sheet (MSDS)
- EPEAT
- For more information
- Regulatory information
- Declaration of Conformity (HP LaserJet Professional P1102, P1102s, P1106, P1108, and P1109)
- Declaration of Conformity (HP LaserJet Pro P1102w and P1109w)
- Regulatory statements
- Additional statements for wireless products
- FCC compliance statement—United States
- Australia statement
- Brazil ANATEL statement
- Canadian statements
- Exposure to Radio Frequency Radiation (Canada)
- European Union regulatory notice
- Notice for use in Russia
- Mexico statement
- Taiwan statement
- Korean statement
- Vietnam Telecom wired/wireless marking for ICTQC Type approved products
- Index
Replace the separation pad
Normal use with good media causes wear. The use of poor media might require more frequent replacement
of the separation pad.
If the product regularly pulls multiple sheets of media at a time, you might need to change the separation
pad.
NOTE: Before you change the separation pad, clean the pickup roller. See
Clean the pickup roller
on page 63.
WARNING! Before changing the separation pad, turn the product off, disconnect the power cord from the
wall outlet, and then wait for the product to cool.
1. Disconnect the product power cord from the product.
2. Remove the paper and close the input tray. Set the product on its front.
3. At the bottom of the product, unscrew the two screws holding the separation pad in place.
60 Chapter 7 Manage and maintain the product ENWW