HP LaserJet Professional P1100 Printer series - User Guide
Table Of Contents
- Product basics
- Software for Windows
- Use the product with Mac
- Connect the product
- Paper and print media
- Print tasks
- Cancel a print job
- Print with Windows
- Open the Windows printer driver
- Get help for any print option with Windows
- Change the number of print copies with Windows
- Print colored text as black with Windows
- Save custom print settings for reuse with Windows
- Improve print quality with Windows
- Print the first or last page on different paper with Windows
- Scale a document to fit page size with Windows
- Add a watermark to a document with Windows
- Print on both sides (duplex) with Windows
- Create a booklet with Windows
- Print multiple pages per sheet with Windows
- Select page orientation with Windows
- Use HP ePrint
- Manage and maintain the product
- Solve problems
- Supplies and accessories
- Service and support
- Specifications
- Environmental product stewardship program
- Protecting the environment
- Ozone production
- Power consumption
- Toner consumption
- Paper use
- Plastics
- HP LaserJet print supplies
- Paper
- Material restrictions
- Disposal of waste equipment by users (EU and India)
- Electronic hardware recycling
- Brazil hardware recycling information
- Chemical substances
- Product Power Data per European Union Commission Regulation 1275/2008
- Restriction on Hazardous Substances statement (India)
- Restriction on Hazardous Substances statement (Turkey)
- Restriction on Hazardous Substances statement (Ukraine)
- Substances Table (China)
- SEPA Ecolabel User Information (China)
- The regulation of the implementation on China energy label for printer, fax, and copier
- Material Safety Data Sheet (MSDS)
- EPEAT
- For more information
- Regulatory information
- Declaration of Conformity (HP LaserJet Professional P1102, P1102s, P1106, P1108, and P1109)
- Declaration of Conformity (HP LaserJet Pro P1102w and P1109w)
- Regulatory statements
- Additional statements for wireless products
- FCC compliance statement—United States
- Australia statement
- Brazil ANATEL statement
- Canadian statements
- Exposure to Radio Frequency Radiation (Canada)
- European Union regulatory notice
- Notice for use in Russia
- Mexico statement
- Taiwan statement
- Korean statement
- Vietnam Telecom wired/wireless marking for ICTQC Type approved products
- Index
Clean the paper path
If you are experiencing toner specks or dots on the printouts, clean the paper path. This process uses a
transparency to remove dust and toner from the paper path. Do not use bond or rough paper.
NOTE: For best results use a sheet of transparency. If you do not have any transparencies, you can use
copier-grade media (60 to 163 g/m
2
(16 to 43 lb)) that has a smooth surface.
1. Make sure that the product is idle and the ready light is on.
2. Load media in the input tray.
3. Open the printer Properties.
4. Click the Device Settings tab.
5. In the Cleaning Page area, click the Start button to process the cleaning page.
NOTE: The cleaning process takes about 2 minutes. The cleaning page stops periodically during the
cleaning process. Do not turn the product off until the cleaning process has finished. You might need to
repeat the cleaning process several times to thoroughly clean the product.
64 Chapter 7 Manage and maintain the product ENWW