HP Color LaserJet CP5220 Series - Software Technical Reference

IPv6 Configuration
The IPv6 Configuration screen shows the status of the IPv6 Network configuration settings. This screen
is read-only and no settings can be modified here.
Up to seven IPv6 addresses can be shown on this screen, depending upon the automatic configuration
of the networking firmware. All available IPv6 addresses are shown.
Figure 2-58 HP EWS IPv6 Configuration screen
Network Identification
Use the Network Identification screen to configure the host name and domain name(s) used to identify
the product on the network.
The values for host name and domain names are retrieved from the firmware and displayed on this
screen. The networking firmware determines what host name and domain name(s) to use and cannot
be modified.
The text entries are disabled under certain circumstances. The following table defines when the entities
are disabled.
Table 2-13 Network Identification screen – Text entries
Text entry Disabled status
Host name Disabled if configured by BOOTP
Domain name (IPv4/IPv6) Disabled if configured by BOOTP, DHCPv4, or DHCPv6
ENWW HP Embedded Web Server 93