HP Color LaserJet CP5220 Series - Software Technical Reference

Enable SNMP v1 read-only access
(uses “public” for the Get Community
value)
Select this option to enable the SNMP v1 agents on the HP Color LaserJet CP5220
Series printer, but limit access to read-only. Write-access is disabled. The default
Get Community name "public" is automatically enabled.
Set Community name:
Type the SNMP Set Community Name
(password) to allow SNMP information to
be configured (or written) on the printer.
Configure Get Community name:
Disable SNMP v1 default Get
Community name of “public”:
Select this option to disable the default
Get community name "public". After
selecting this option, type the values in
the Get Community name and Confirm
Get Community name fields.
Disable SNMP v1 Select this option to disable the SNMP v1 agents on the HP Color LaserJet CP5220
Series printer, which is recommended for secure environments. If SNMP v1 is
disabled, some port monitors or discovery utilities might not operate properly.
Apply Click Apply to make the changes take effect.
ENWW HP Embedded Web Server 97