HP Color LaserJet CP5220 Series - Software Technical Reference

The name that appears in the Name text box depends on the following conditions:
●
If a saved custom paper size has been selected from the drop-down menu on the Paper/Quality
tab, the Name text box shows the name of the selected custom paper size.
●
If a standard paper size has been selected on the Paper/Quality tab, the Name text box shows
the default name of "Custom."
●
If a new name has been typed into the Name text box for the purpose of saving a new size or
renaming an existing size, then that new name will remain in the text box until the new size is saved
or the dialog box is closed.
If you type a new name into the Name text box, but then do not click Save, you can change the width
and height values without losing the name. However, if you close the dialog box without clicking Save,
any unsaved name or size values are lost without warning.
Paper Size
Change the width and height values by typing numeric strings into the edit boxes in the Paper Size
group box.
Any entry that is greater than the maximum limits of the width and height edit box is rounded down to
the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height
edit box is rounded up to the minimum valid entry.
If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest
whole millimeter. The custom paper-size range maximum is the limit rounded down to the nearest whole
millimeter. Any non-numerical entry reverts to the last valid entry. Width and height entries are validated
when the focus has changed.
The resolution of each edit box is 1 millimeter or 1/10 of an inch, depending on the current measurement
units.
Units
To change measurement units, click one of the options in the Units group box (either Inches or
Millimeters).
Custom width and height control limits
The minimum paper size for the HP Color LaserJet CP5220 Series printer is 76.2 x 127 mm (3 x 5
inches) and the maximum is 279 x 431 mm (11 x 17 inches). The following tables summarizes paper
size limits.
The following table identifies the paper types the HP Color LaserJet CP5220 Series printer supports in
trays 1 and 2.
Table 4-9 Tray 1 and Tray 2 specifications
Tray 1 and Tray 2 Dimensions
1
Weight Capacity
2
Paper Minimum: 76 x 127 mm
(3 x 5 inches)
60 to 163 g/m
2
(16 to 43 lb)
Up to 176 g/m
2
(47 lb) for
postcards
Single sheet of 75 g/m
2
(20 lb)
paper for Tray 1
Up to 250 sheets for Tray 2
Maximum: 279 x 431 mm
(11 x 17 inches)
176 Chapter 4 HP PCL 6 print driver and HP UPD PS for Windows ENWW