HP Color LaserJet CP5220 Series - Software Technical Reference

●
Gloss Level (HP UPD PS only)
Figure 4-14 Paper/Quality tab – Print Quality group box
Print Quality drop-down menu
The Print Quality drop-down menu contains the Image REt 3600 resolution option. This setting
produces 3600 dpi color output quality through HP Image Resolution Enhancement Technology (Image
REt) 3600. This setting is selected by default.
Gloss Level (HP UPD PS only)
The HP Color LaserJet CP5220 Series is capable of printing exceptionally high gloss levels on a wide
range of paper types. However, on some paper types, the gloss level might noticeably decrease from
page to page for a particular print job.
The following adjustments can be set by the user in order to maintain exceptionally high gloss level on
all printed pages.
Gloss Level driver settings
For users who normally print general office documents where high gloss levels are not critical but need
high gloss for particular print jobs. Users can select the appropriate gloss option for their document
through the driver
On the Paper/Quality tab, the following Gloss Level settings are available:
●
Default. Uses product settings for gloss.
●
Best. High gloss on all pages.
●
Standard. Uses the standard gloss setting. This setting provides the fastest print performance, but
also produces some gloss variation over time.
Select Best for glossy print jobs such as photos or brochures if the gloss finish decreases after the first
page is printed. The Best setting reduces printing performance on the print job for which it was selected,
but it does not impact product performance for other users.
See the HP Color LaserJet CP5220 Series User Guide for control panel options and further information
about maintaining high gloss levels.
182 Chapter 4 HP PCL 6 print driver and HP UPD PS for Windows ENWW