HP Color LaserJet CP5220 Series - Software Technical Reference

Adjustment Range (*default) Description
Drum Banding Off*/On This mode reduces the occurrence of
sharp lines at the OPC drum pitch (75
mm) by extra prerotations and by jogging
the drums slightly after each job. The
jogging motion is slightly audible.
Registration Extends the pre-rotation and post-
rotation sequences.
Tray 1 When this option is turned on and a print
job is printing from Tray 1 using the
universal size command, which is the
default, the printer will clean the belt
every time the printer spins down.
Re-Transfer This setting reduces or eliminates re-
transfer.
Jam Reduction When this setting is turned on, the
interpage gap is increased. Printing
performance is reduced slightly.
Heavy Media Optimization
Transfer Belt Cleaning Off*/+1 to +2 This mode increases transfer belt (ITB)
cleaning effectiveness by increasing the
ICL (ITB Cleaning) roller/brush voltage
for the +1 setting, and by increasing
cleaning frequency for the +2 setting.
This should be used when the ghost of
previous heavy coverage pages appears
on following pages.
Transfer Belt Cleaning Voltage Off*/–5 to +5 This adjustment allows fine control of the
ICL roller/brush voltage. Decreasing the
voltage is better for OPC drum ghosting.
Increasing the voltage is better for heavy
coverage cleaning.
Transfer Belt Voltage – Y Off*/–5 to +5 This adjustment allows fine control of the
Yellow station OPC-to-ITB transfer
voltage. (There is currently no known
defect associated with this adjustment.)
Transfer Belt Voltage – M Off*/–5 to +5 This adjustment allows fine control of the
Magenta station OPC-to-ITB transfer
voltage. (There is currently no known
defect associated with this adjustment.)
Transfer Belt Voltage – C Off*/–5 to +5 This adjustment allows fine control of the
Cyan station OPC-to-ITB transfer
voltage. (There is currently no known
defect associated with this adjustment.)
Transfer Belt Voltage – K Off*/–5 to +5 This adjustment allows fine control of the
Cyan station OPC-to-ITB transfer
voltage. (There is currently no known
defect associated with this adjustment.)
Table 2-8 Optimize modes (continued)
58 Chapter 2 Windows software description ENWW