HP Color LaserJet CP5220 Series - Software Technical Reference

System Setup
Use the System Setup screen to change settings on the printer such as Jam Recover and Auto
Continue.
Figure 2-24 HP ToolboxFX System Setup screen
The following Jam recovery settings are available:
●
Auto (default)
●
On
●
Off
The following Auto continue settings are available:
●
On
●
Off (default)
Set the Connection time-out (I/O) setting to any value from 5 to 7200 seconds (default is 120).
Set the Cartridge low threshold setting to any value from 1 to 20% (default is 6%). The Cartridge low
threshold option sets the percentage threshold that triggers a toner low alert in HP ToolboxFX.
NOTE: Click Apply to make the changes take effect.
ENWW HP ToolboxFX 59