HP Color LaserJet CP5220 Series - Software Technical Reference

Up to seven IPv6 addresses can be shown on this screen, depending upon the automatic configuration
of the networking firmware. All available IPv6 addresses are shown.
Figure 2-33 HP ToolboxFX IPv6 Configuration screen
Network Identification
Use the Network Identification screen to configure the host name and domain name(s) used to identify
the product on the network.
The values for host name and domain names are retrieved from the firmware and displayed on this
screen. The networking firmware determines the host name and domain name(s) to use. This
information cannot be modified.
The text entries are disabled under certain circumstances. The following table defines when the entities
are disabled:
Table 2-9 Network Identification screen – Text entries
Text entry Disabled status
Host name Disabled if configured by BOOTP
Domain name (IPv4/IPv6) Disabled if configured by BOOTP, DHCPv4, or DHCPv6
68 Chapter 2 Windows software description ENWW