HP Color LaserJet CP5220 Series - Software Technical Reference

Enable SNMP v1 read-only access
(uses “public” for the Get Community
value)
Select this option to enable the SNMP v1 agents on the HP Color LaserJet CP5220
Series printer, but limit access to read-only. Write-access is disabled. The default
Get Community name "public" is automatically enabled.
Set Community name:
Type the SNMP Set Community Name
(password) to allow SNMP information to
be configured (or written) on the printer.
Configure Get Community name:
Disable SNMP v1 default Get
Community name of “public”:
Select this option to disable the default
Get community name "public". After
selecting this option, type the values in
the Get Community name and Confirm
Get Community name fields.
Disable SNMP v1 Select this option to disable the SNMP v1 agents on the HP Color LaserJet CP5220
Series printer, which is recommended for secure environments. If SNMP v1 is
disabled, some port monitors or discovery utilities might not operate properly.
Apply Click Apply to make the changes take effect.
Other screens
The following table lists screens that are also available through HP ToolboxFX.
Table 2-12 HP ToolboxFX – Other screens
Screen Access
About HP ToolboxFX screen Click the HP logo that appears in the upper-left corner of the
HP ToolboxFX screens.
Support and Troubleshooting screen Click the Support and Troubleshooting link in the Other
Links box that appears on all HP ToolboxFX and HP EWS
screens.
Online HP Offers screen Click the Online HP Offers link in the Other Links box that
appears on all HP ToolboxFX and HP EWS screens.
Product Registration screen Click the Product Registration link in the Other Links box
that appears on all HP ToolboxFX and HP EWS screens.
Shop for Supplies screen Click the Shop for Supplies link in the upper-right corner of
the HP ToolboxFX screens.
Table 2-11 SNMP options and settings (continued)
72 Chapter 2 Windows software description ENWW