HP Color LaserJet Professional CP5220 Series - User Guide

Embedded Web server sections
The table below describes the basic screens of the embedded Web server.
Tab or section Description
Status tab
Provides product, status, and
configuration information.
●
Device Status: Shows the product status and shows the approximate life remaining for
HP supplies.
●
Supplies Status: Shows the approximate life remaining for HP supplies. This page also
provides supplies part numbers.
●
Device Configuration: Shows the information found on the product configuration page.
●
Network Summary: Shows the information found on the product network summary
page.
●
Reports: Allows you to print the configuration page, supplies status page, network
summary, usage page, diagnostics page, color usage log, PCL font list, PCL 6 font list,
and PS font list that the product generates.
●
Color Usage Job Log: Shows user color print jobs on a job-by-job basis.
●
Event Log: Shows a list of all product events and errors.
●
Support button: Provides a link to the product support page. The Support button can be
password-protected; see
Set password on page 67
●
Shop for Supplies button: Provides a link to a page where you can order supplies for the
product. The Shop for Supplies button can be password-protected; see
Set password
on page 67
System tab
Provides the ability to configure the
system settings from a computer.
●
Device Information: Allows you to name the product and assign an asset number to it.
Enter the name for the primary contact who will receive information about the product.
●
Paper Setup: Allows you to change the paper-handling defaults for the product.
●
Print Quality: Allows you to change the print quality defaults for the product, including
calibration settings.
●
Print Density: Allows you to change the contrasts, highlights, midtones, and shadows
values for each supply.
●
Paper Types: Allows you to configure print modes that correspond to the media types
that the product accepts.
●
Extended Print Modes: Allows you to configure the product extended fuser modes to
enhance print quality.
●
System Setup: Allows you to set the Sleep Delay, Consumable User-Defined Low
percentage, and the product language.
●
Service: Allows you to start the cleaning procedure on the product.
●
Product Security: Allows you to set up a system password.
●
Support button: Provides a link to the product support page. The Support button can be
password-protected.
●
Shop for Supplies button: Provides a link to a page where you can order supplies for the
product. The Shop for Supplies button can be password-protected.
NOTE: The System tab can be password-protected; see
Set password on page 67. If this
product is on a network, always consult with the printer administrator before changing
settings on this tab.
ENWW Embedded Web server 75