HP LaserJet M1130/M1210 MFP User Guide

2. Adjust the guides until they are snug against the
paper.
3. Press the Setup button.
4. Select the Phone Book menu, and then press the
OK button.
5. From the list, select the phone book entry. If no
entry exists, use the keypad on the control panel
to dial the number.
6. On the control panel, press the Send Fax
button. The product starts the fax job.
Manual dial faxing
Usually, the product dials after you press the Send Fax button. At times, however, you might want the
product to dial each number as you press it. For example, if you are charging your fax call to a calling card,
you might need to dial the fax number, wait for the acceptance tone of your telephone company, and then
dial the calling card number. When dialing internationally, you might need to dial part of the number and then
listen for dial tones before continuing to dial.
Send a fax to a group manually (ad hoc faxing)
Use the following instructions to send a fax to a group of recipients:
1. Load the document into the document feeder input tray.
2. Press the Setup
button.
3. Select the Phone Book menu, and then press the OK button.
4. From the list, select the phone book entry. If no entry exists, use the keypad on the control panel to dial
the number.
5. To continue dialing numbers, repeat steps 3 and 4. If you are finished dialing numbers, go to the next
step.
124 Chapter 10 Fax (M1210 Series only) ENWW