HP LaserJet M1130/M1210 MFP User Guide

Control panel message Description Recommended action
Fax is busy
Redial pending
The fax line to which you were sending a fax
was busy. The product automatically redials
the busy number.
Allow the product to retry sending the fax.
Call the recipient to ensure that the fax
machine is on and ready.
Check that you are dialing the correct fax
number.
Check for a dial tone on the phone line by
pressing the Send Fax
button.
Make sure that the phone is working by
disconnecting the product, plugging in a
telephone to the phone line, and making a
voice call.
Plug the product phone cord into a jack for
another phone line, and try sending the fax
again.
Try a different phone cord.
If the error persists, contact HP. See
www.hp.com/support/ljm1210series or the
support flyer that came in the product box.
Fax memory full
Canceling recv.
During the fax transmission, the product ran
out of memory. Only the pages that fit into
memory will be printed.
Print all of the faxes, and then have the sender
resend the fax. Have the sender divide the fax
job into multiple jobs before resending. Cancel
all fax jobs or clear the faxes from memory.
Fax memory full
Canceling send
During the fax job, the memory filled. All pages
of the fax have to be in memory for a fax job to
work correctly. Only the pages that fit into
memory were sent.
Print all received faxes or wait until all pending
faxes are sent.
Ask the sender to send the fax again.
Cancel all fax jobs or clear the faxes from
memory.
134 Chapter 10 Fax (M1210 Series only) ENWW