HP LaserJet M1130/M1210 MFP User Guide

●
Receive fax
●
Never (the factory-set default)
1. On the control panel, press the Setup
button.
2. Use the arrow buttons to select the Reports menu, and then press the OK button.
3. Use the arrow buttons to select the Fax Reports menu, and then press the OK button.
4. Use the arrow buttons to select the Fax Confirmation menu, and then press the OK button.
5. Use the arrow buttons to select the option for when you want the fax error reports to be printed.
6. Press the OK button to save the selection.
Include the first page of each fax on the fax confirmation, fax error, and last call reports
If this option is turned on and the page image still exists in the product memory, the fax configuration, fax
error, and last call reports include a thumbnail (50% reduction) of the first page of the most recent fax that
was sent or received. The factory-set default for this option is On.
1. On the control panel, press the Setup
button.
2. Use the arrow buttons to select the Reports menu, and then press the OK button.
3. Use the arrow buttons to select the Fax Reports menu, and then press the OK button.
4. Use the arrow buttons to select the Include 1st page menu, and then press the OK button.
5. Use the arrow buttons to select the On option, and then press the OK button to confirm the selection.
Change error correction and fax speed
Set the fax-error-correction mode
Usually, the product monitors the signals on the telephone line while it is sending or receiving a fax. If the
product detects an error during the transmission and the error-correction setting is On, the product can
request that the portion of the fax be resent. The factory-set default for error correction is On.
You should turn off error correction only if you are having trouble sending or receiving a fax, and you are
willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to
send a fax overseas or receive one from overseas, or if you are using a satellite telephone connection.
1. On the control panel, press the Setup
button.
2. Use the arrow buttons to select the Fax setup menu, and then press the OK button.
3. Use the arrow buttons to select the All faxes menu, and then press the OK button.
4. Use the arrow buttons to select the Error correction menu, and then press the OK button.
5. Use the arrow buttons to select the On or Off option, and then press the OK button to save the
selection.
140 Chapter 10 Fax (M1210 Series only) ENWW