HP LaserJet M1130/M1210 MFP User Guide

Clean the paper path
If you are experiencing toner specks or dots on the printouts, clean the paper path. This process uses a
transparency to remove dust and toner from the paper path. Do not use bond or rough paper.
NOTE: For best results use a sheet of transparency. If you do not have any transparencies, you can use
copier-grade media (60 to 163 g/m
2
(16 to 43 lb)) that has a smooth surface.
1. Make sure that the product is idle and the Ready light is on.
2. Load media in the input tray.
3. Use the printer driver to process the cleaning page. Follow the appropriate procedure, depending on the
operating system you are using.
Windows XP, Windows Server 2003, and Windows Server 2008 (using the default Start menu view)
a. Click Start, and then click Printers and Faxes.
b. Right-click the driver icon, and then select Properties.
c. Click the Device Settings tab.
Windows XP, Windows Server 2003, and Windows Server 2008 (using the Classic Start menu view)
a. Click Start, click Settings, and then click Printers.
b. Right-click the driver icon, and then select Properties.
c. Click the Device Settings tab.
Windows Vista
a. Click Start, click Control Panel, and then in the category for Hardware and Sound click Printer.
b. Right-click the driver icon, and then select Properties.
c. Click the Device Settings tab.
Mac OS X 10.4
a. From the Apple menu
, click the System Preferences menu and then click the Print & Fax icon.
b. Click the Printer Setup button.
Mac OS X 10.5 and 10.6
a. From the Apple menu
, click the System Preferences menu and then click the Print & Fax icon.
b. Select the product in the left side of the window.
ENWW Clean the product 181