HP LaserJet M1130/M1210 MFP User Guide

Table 12-2 Control-panel light patterns (continued)
Light status Error code State of the product Action
Attention light is blinking, and ready
light is on.
The product has experienced a continual
error from which it will recover on its
own.
If the recovery is successful, the product
continues to the processing data state
and completes the job.
If the recovery is unsuccessful, the
product continues to the continuable
error state. Try removing any media
from the media path and turning the
product power off, and then on again.
The attention and ready lights are on.
E6
E7
E8
E9
The product has experienced a fatal error
from which it cannot recover.
1. Turn off the product or disconnect
the power cord from the product.
2. Wait 30 seconds, and then turn on
the product or reconnect the power
cord to the product.
3. Wait for the product to initialize.
If the error persists, contact
HP customer support.
194 Chapter 12 Solve problems ENWW