HP LaserJet M1130/M1210 MFP User Guide

Table 2-6 Fax setup menu (continued)
Menu Item Sub-menu item Sub-menu item Description
Def. Glass size Letter
A4
Sets the default paper size to use when scanning and copying
from the flatbed glass.
Dialing Mode Tone
Pulse
Sets whether the product should use tone or pulse dialing.
Redial if busy On
Off
Sets whether or not the product should attempt to redial if the
line is busy.
Redial-no answer On
Off
Sets whether the product should attempt to dial if the recipient
fax number does not answer.
Redial Comm. Error On
Off
Sets whether the product should attempt to redial the recipient
fax number if a communication error occurs.
Dial Prefix On
Off
Specifies a prefix number that must be dialed when sending
faxes from the product.
Detect dial tone On
Off
Sets whether the product should check for a dial tone before
sending a fax.
Fax Recv. setup Answer mode Automatic
TAM
Fax/Tel
Manual
Sets the type of answer mode. The following options are
available:
●
Automatic: The product automatically answers an
incoming call on the configured number of rings.
●
TAM: Use this setting when a telephone answering
machine is connected to the product. The product does
not automatically answer the call. Instead, it waits until it
detects the fax tone.
●
Fax/Tel: The product answers incoming calls
immediately. If it detects the fax tone, it processes the
call as a fax. If it does not detect the fax tone, it creates
an audible ring to alert you to answer the incoming voice
call.
●
Manual : You must press the Send Fax
button or use
an extension phone to make the product answer the
incoming call.
Rings to answer Sets the number of rings that must occur before the fax
modem answers.
ENWW Control-panel menus 17