HP LaserJet M1130/M1210 MFP User Guide

Table 2-6 Fax setup menu (continued)
Menu Item Sub-menu item Sub-menu item Description
Answer Ring Type All Rings
Single
Double
Triple
Double&Triple
Allows you to have two or three phone numbers on a single
line, each with a different ring pattern (on a phone system with
distinctive-ring service).
●
All Rings: The product answers any calls that come
through the telephone line.
●
Single: The product answers any calls that produce a
single-ring pattern.
●
Double: The product answers any calls that produce a
double-ring pattern.
●
Triple: The product answers any calls that produce a
triple-ring pattern.
●
Double&Triple: The product answers any calls that
produce a double-ring or triple-ring pattern.
Extension Phone On
Off
When this feature is enabled, you can press the 1-2-3 buttons
on the extension phone to cause the product to answer an
incoming fax call.
Silence detect On
Off
Sets whether the product can receive faxes from older model
fax machines that do not emit the initial fax tones used during
fax transmission.
Fit to page On
Off
Shrinks faxes that are larger than Letter-size or A4-size so that
they can fit onto a Letter-size or A4-size page. If this feature is
set to Off, faxes larger than Letter or A4 will print on multiple
pages.
Stamp faxes On
Off
Sets product to add the date, time, sender's phone number,
and page number to each page of the faxes that this product
receives.
Forward fax On
Off
Sets product to send all received faxes to another fax machine.
Block faxes Add entry
Delete entry
Clear all
Modifies the blocked fax list. The blocked fax list can contain
up to 30 numbers. When the product receives a call from one of
the blocked fax numbers, it deletes the incoming fax. It also
logs the blocked fax in the activity log along with job-
accounting information.
Reprint faxes On
Off
Sets whether all received faxes stored in available memory can
be reprinted.
Private receive On
Off
Print faxes
Setting the Private receive feature to On requires you to set a
password. After the password is set, the following options are
set:
●
The Private receive feature is turned on.
●
All old faxes are deleted from memory.
●
The Forward fax or Receive to PC options are set to Off
and are not allowed to be set.
●
All incoming faxes are stored in memory.
18 Chapter 2 Control panel menus (M1210 Series only) ENWW