HP LaserJet M1130/M1210 MFP User Guide

Table 2-8 Service menu
Menu item Sub-menu item Description
T.30 trace Never
Now
If error
At end of call
Prints or schedules a report that is used to troubleshoot fax
transmission issues.
Restore Defaults Sets all customized settings to the factory default values.
Cleaning Mode Cleans the product when specks or other marks appear on printed
output. The cleaning process removes dust and excess toner from the
paper path.
When selected, the product prompts you to load plain Letter or A4
paper in the tray. Press the OK button to begin the cleaning process.
Wait until the process completes. Discard the page that prints.
USB speed High
Full
Sets the USB speed.
Less paper curl On
Off
When printed pages are consistently curled, this option sets the
product to a mode that reduces curl.
The default setting is Off.
Archive print On
Off
When printing pages that will be stored for a long time, this option
sets the product to a mode that reduces toner smearing and dusting.
The default setting is Off.
Table 2-9 Network config. menu
Menu item Sub-menu item Description
TCP/IP Config Automatic
Manual
Select the Automatic option to automatically configure
all the TCP/IP settings.
Select the Manual option to manually configure the IP
address, subnet mask, and default gateway.
The default setting is Automatic.
Link Speed Automatic (default)
10T Full
10T Half
100TX Full
100TX Half
Sets the link speed manually if needed.
After setting the link speed, the product automatically
restarts.
20 Chapter 2 Control panel menus (M1210 Series only) ENWW