HP LaserJet M1130/M1210 MFP User Guide

Connect with USB
This product supports a USB 2.0 connection. You must use an A-to-B type USB cable that is no longer than 2
meters (6.56 feet).
CD installation
1. Insert the software installation CD into the computer CD drive.
NOTE: Do not connect the USB cable until prompted.
2. If the installation program does not open automatically, browse the CD contents and run the SETUP.EXE
file.
3. Follow the onscreen instructions for installing the software.
When you use the CD to install the software, you can select the following types of installations:
●
Easy Install (recommended)
You are not prompted to accept or make changes to defaults.
●
Advanced Install
You are prompted to accept or make changes to defaults.
ENWW Connect with USB 37