HP LaserJet M1130/M1210 MFP User Guide

●
Allowed Senders. To prevent your product from printing unexpected documents, click the
Allowed Senders tab. Click Allowed Senders Only, and then add the e-mail addresses from
which you want to allow ePrint jobs.
●
Print Options. To set up default settings for all ePrint jobs sent to this product, click the
Print Options tab, and then select the settings that you want to use.
●
Advanced. To change the product’s e-mail address, click the Advanced tab.
Use HP Direct Print (wireless models only)
Use HP Direct Print to print directly to the product from any mobile device (such as a smart phone, net book,
or laptop computer).
NOTE: No setup is necessary, but HP Direct Print must be enabled. Your mobile device must have an HP
print application installed.
1. To enable HP Direct Print from the product control panel, follow these steps:
a. Use the arrow buttons to select the Network config. menu, and then press the OK button.
b. Use the arrow buttons to select the Wireless Menu, and then press the OK button.
c. Use the arrow buttons to select the Wireless Direct, and then press the OK button.
2. For advanced configuration options, enable HP Web Services in the HP Embedded Web Server (EWS) by
following these steps:
a. After the product is connected to the network, print a configuration page and identify the product
IP address.
b. At your computer, open a Web browser and enter the product IP address into the address line. The
HP EWS screen appears.
c. Click the Networking tab.
d. On the Networking page, click the check box, enter the network name (SSID), and then click the
Apply button. The IP address of the mobile device appears in the Networking page.
NOTE: To find the network name (SSID), click the Wireless Configuration menu in the
Networking page.
3. To print a document from an application, select File, and then select Print.
NOTE: If only one product that supports HP Direct Print is connected to the wireless network, the
document prints. If more than one product that supports HP Direct Print is connected, a list of products
appears; you must select your product before proceeding to the next step. If no product is discovered,
you are prompted to search for ePrint or local products.
Use AirPrint
Direct printing using Apple’s AirPrint is supported for iOS 4.2 or later. Use AirPrint to print directly to the
product from an iPad (iOS 4.2), iPhone (3GS or later), or iPod touch (third generation or later) in the following
applications:
●
Mail
●
Photos
ENWW Print with Windows 73