HP LaserJet M1130/M1210 MFP User Guide

Collate a copy job
M1130 Series: The product cannot automatically collate copies.
Collate copies (M1210 Series)
1. Press the Setup button.
2. Use the arrow buttons to select the Copy setup
menu, and then press the OK button.
3. Use the arrow buttons to select the Def.
Collation option, and then press the OK button.
4. Use the arrow buttons to select the On option,
and then press the OK button.
Copy settings
Change copy quality
The following copy-quality settings are available:
●
Text: Use this setting for documents that contain mostly text. This is the default setting for the M1210
Series models.
●
Draft: Use this setting when you are not concerned about the quality of the copy. This setting uses less
toner.
●
Mixed: Use this setting for documents that contain a mixture of text and graphics. This is the default
setting for the M1130 Series models.
●
Film photo: Use this setting to copy photographs.
●
Picture: Use this setting to copy non-photographic graphics.
Change the copy quality setting (M1130 Series)
NOTE: For this model, you cannot change the copy-quality setting for individual copy jobs. Use this
procedure to change the default copy-quality setting for all copy jobs.
ENWW Copy settings 85