LASERJET PROFESSIONAL M1130/M1210 MFP SERIES User Guide Addendum Wireless Models Only
HP LaserJet Professional M1130/M1210 MFP series User Guide Addendum (wireless models only) Use this addendum in conjunction with the complete version of the product user guide.
Copyright and License Trademark Credits © Copyright 2015 HP Development Company, L.P. Microsoft®, Windows®, Windows® XP, and Windows Vista® are U.S. registered trademarks of Microsoft Corporation. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice.
Conventions used in this guide TIP: NOTE: Tips provide helpful hints or shortcuts. Notes provide important information to explain a concept or to complete a task. CAUTION: Cautions indicate procedures that you should follow to avoid losing data or damaging the product. WARNING! Warnings alert you to specific procedures that you should follow to avoid personal injury, catastrophic loss of data, or extensive damage to the product.
iv Conventions used in this guide ENWW
Table of contents 1 Product basics ............................................................................................................................................... 1 Product views ........................................................................................................................................................ 2 Control-panel layout ...........................................................................................................................
European Union regulatory notice .................................................................................................... 21 Notice for use in Russia ..................................................................................................................... 21 Mexico statement .............................................................................................................................. 21 Taiwan statement .................................................................
1 Product basics ● ENWW Product views 1
Product views Control-panel layout HP LaserJet Professional M1210 MFP series (wireless models only) 4 5 6 7 3 2 1 16 8 9 10 15 2 14 13 12 11 1 Toner-level status light: Indicates the level of toner in the print cartridge is low. 2 Attention light: Indicates a problem with the product. View the LCD display for a message. 3 Ready light: Indicates the product is ready or is processing a job. 4 LCD display screen: Displays status information, menus, and messages.
15 Numeric keypad: Use the keypad to enter fax numbers or to enter data. 16 Wireless button and status light: Use the button to turn off or turn on the product wireless function. The status light indicates wireless operation. ENWW ● On: The product is connected to a wireless network. ● Fast blinking: A Wi-Fi Protected Setup (WPS) error has occurred. ● Slow blinking: The product is attempting to connect to a wireless network. ● Off: The product is in one of the following states.
4 Chapter 1 Product basics ENWW
2 Control panel menus ● ENWW Control-panel menus 5
Control-panel menus For the HP LaserJet Professional M1210 MFP series (wireless models only), the Wireless Menu sub-menu is available from the control-panel Network config. menu. ● Use the Wireless Menu sub-menus to enable, disable, test, or set up the product wireless functions. Table 2-1 Wireless Menu sub menus Menu item Sub-menu item Description Wireless Menu Wireless Radio Enable or disable the product wireless radio functionality. On Off The default setting is On.
3 Connect the product ● ENWW Network connection 7
Network connection The product can connect to wireless networks. Install the product on a wireless network with the software CD 1. Insert the software CD into the computer CD tray. If the installation program does not start automatically, browse the CD contents and run the SETUP.EXE file. 2. Follow the onscreen instructions to complete the product installation. 3. When the installation is complete, if you want to verify that the product has a network IP address, print a configuration page. button a.
4. Insert the software CD into the computer CD tray. If the installation program does not start automatically, browse the CD contents and run the SETUP.EXE file. 5. Follow the onscreen instructions to complete the product installation. The figures below show the difference between an ad-hoc network connection and an infrastructure network connection.
Restore default wireless settings Use one of the following procedures to restore the default wireless settings. NOTE: If an error occurs, uninstall the product, and then re-run the installer program. When prompted for network settings, provide the settings. For more information about uninstalling and installing the product, see the complete HP LaserJet Professional M1130/M1210 MFP series User Guide. Preferred method to restore the default wireless settings a. Press the Setup b.
4 Print tasks ● ENWW Use HP ePrint 11
Use HP ePrint HP ePrint is a suite of Web-based printing services that enable a supported HP product to print documents of the following types: ● E-mail messages and attachments sent directly to the HP product’s e-mail address ● Documents from select mobile device print applications Use HP Direct Print Use HP Direct Print to print directly to the product from any mobile device (such as a smart phone, net book, or laptop computer). NOTE: No setup is necessary, but HP Direct Print must be enabled.
5 Solve problems ● ENWW Solve connectivity problems 13
Solve connectivity problems Solve wireless problems The installation program cannot detect the product during the setup process. Cause Solution The product is off. Verify that the product is on and ready. Restart the product if necessary. The product is too far away from the wireless router or access point. Move the product closer to the wireless router or access point. A personal firewall program is blocking communication. Temporarily disable the firewall program to install the product.
The wireless connection is sometimes disabled. ENWW Cause Solution The product environment might be affecting wireless communication. The following situations can affect wireless communication: Move the product to a location where it can receive a steady signal from the wireless router or access point. Or you might need to move the wireless router or access point. ● A concrete or metal framed wall stands between the product and the wireless router or access point.
16 Chapter 5 Solve problems ENWW
A ENWW Regulatory information ● Declaration of Conformity (wireless models) ● Additional statements for wireless products 17
Declaration of Conformity (wireless models) Declaration of Conformity according to ISO/IEC 17050-1 and EN 17050-1 Manufacturer's Name: HP Inc. Manufacturer's Address: 11311 Chinden Boulevard DoC#: BOISB-0901-05-rel.
ENERGY USE: Regulation (EC) No. 1275/2008 EN50564:2011 ; IEC62301 :2011 RoHS: EN50581:2012 Supplementary Information: The product herewith complies with the requirements of the EMC Directive 2004/108/EC, the Low Voltage Directive2006/95/EC, the R&TTE Directive 1999/5/EC, the Ecodesign Directive 2009/125/EC, and the RoHS Directive 2011/65/EU; and carries the CE -Marking accordingly. This Device complies with Part 15 of the FCC Rules.
Additional statements for wireless products FCC compliance statement—United States Exposure to radio frequency radiation CAUTION: The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized.
Exposure to Radio Frequency Radiation (Canada) WARNING! Exposure to Radio Frequency Radiation. The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches).
Taiwan statement Korean statement Vietnam Telecom wired/wireless marking for ICTQC Type approved products 22 Appendix A Regulatory information ENWW
Index C connectivity solving problems 14 control panel buttons and lights 2 menus 6 D document conventions iii E ePrint HP Direct Print 12 using 12 H HP Direct Print using 12 P problem-solving connectivity 14 wireless problems 14 R restore, wireless settings 10 S settings, wireless restore default 10 solving wireless problems 14 ENWW Index 23
24 Index ENWW
