HP LaserJet M1130/M1210 MFP User Guide Wireless Addendum

Restore default wireless settings
Use one of the following procedures to restore the default wireless settings.
NOTE: If an error occurs, uninstall the product, and then re-run the installer program. When prompted for
network settings, provide the settings. For more information about uninstalling and installing the product,
see the complete HP LaserJet Professional M1130/M1210 MFP series User Guide.
Preferred method to restore the default wireless settings
a. Press the Setup
button to open the menus.
b. Use the right arrow
or left arrow button to navigate to the Network config. menu. Press the OK
button to select the menu.
c. Use the right arrow
or left arrow button to navigate to Restore Defaults. Press the OK button to
select this item and restore the default wireless settings.
Alternate method to restore the default wireless settings
a. Turn the product off.
b. Press and hold the wireless
button and the cancel button, and then turn the product on.
c. Hold the buttons until all of the lights blink in unison, and then release the buttons.
10 Chapter 3 Connect the product ENWW