HP LaserJet Pro CP1520 - Software Technical Reference

Send Ctrl-D Before Each Job
This option specifies whether the product is reset at the beginning of every postscript document. The
default setting is No. Pressing Ctrl-D resets the product to its default setting to ensure that previous
print jobs do not affect the current print job. Using Ctrl-D might cause a print job to fail if the product is
connected through a network. If the document fails to print when sent to a product connected through
serial ports, change No to Yes.
Send Ctrl-D After Each Job
This option specifies whether the product is reset at the end of every postscript document. The
default setting is Yes. Pressing Ctrl-D resets the product to its default setting to ensure that future
print jobs are not affected by the current print job. Using Ctrl-D might cause a print job to fail if the
product is connected through a network. If the document fails to print when sent to a network product,
change Yes to No.
Convert Gray Text to PostScript Gray
This option specifies whether to convert the true gray value (RGB) in text to the gray that the printer
driver provides. The following settings are available:
●
No (default)
●
Yes
Convert Gray Graphics to PostScript Gray
This option specifies whether to convert the true gray value (RGB) in graphics to the gray provided by
the printer driver. The following settings are available:
●
No (default)
●
Yes
Add Euro Currency Symbol to PostScript Fonts
This option specifies whether to add the Euro symbol to the device fonts. The following settings are
available:
●
Yes (default)
●
No
Job Timeout
This option specifies how long the document can take to get from the computer to the product before
the product stops trying to print the document. If you specify 0 seconds, the product continues trying
to print indefinitely. The default setting is 0 seconds. Use the spin box to change this value, up to a
maximum of 32,767 seconds.
Wait Timeout
This option specifies how long the product waits to get more postscript information from the computer.
After the specified time passes, the product stops trying to print the document and prints an error
message. When printing a very complicated document, increase this value. If you specify 0 seconds,
134 Chapter 4 HP PCL 6, HP PCL 5 UPD driver, and HP UPD PS for Windows ENWW