HP LaserJet Pro CP1520 - Software Technical Reference

the product waits indefinitely. The default setting is 300 seconds. Use the spin box to change this
value, up to a maximum of 32,767 seconds.
Minimum Font Size to Download as Outline
This option specifies the minimum font size (in pixels) for which the printer driver downloads
TrueType fonts as outline (Type 1) fonts. Any font smaller than the minimum setting is downloaded as
a bitmap (Type 3) font. Use this option to fine-tune the Automatic setting for the TrueType Font
Download option on the Advanced tab in Document Defaults. The default setting is 100 pixel(s).
Use the spin box to change this value, up to a maximum of 32,767 pixels.
Maximum Font Size to Download as Bitmap
This option specifies the maximum font size (in pixels) for which the printer driver will download
TrueType fonts as bitmap (Type 3) fonts. Any font larger than the maximum setting will be
downloaded as an outline (Type 1) font. Use this option to fine-tune the Automatic setting or override
the Send TrueType as Bitmap setting for the TrueType Font Download option on the Advanced
tab in Document Defaults. The default setting is 600 pixel(s). Use the spin box to change this value,
up to a maximum of 32,767 pixels.
Installable Options
●
Allow Manual Duplexing
●
Printer Memory
●
Job Separator
●
Printer Status Notification
Allow Manual Duplexing
Use this setting to allow printing on both sides of a page using manual two-sided printing. This default
setting is Enabled.
Printer Memory
Use the Printer Memory setting to configure the product to use additional memory when it is added
to the product.
The following Printer Memory settings are available:
●
128 MB
●
192 MB
●
256 MB
Job Separator
Use the Job Separator setting to insert a blank page between print jobs. The default setting for Job
Separator is Disabled.
ENWW
HP PCL 6, HP PCL 5 UPD driver, and HP UPD PS for Windows
135