HP LaserJet Pro CP1520 - Software Technical Reference

Up to seven IPv6 addresses can be shown on this page, depending upon the automatic configuration
of the networking firmware. All available IPv6 addresses are shown.
Figure 2-41 Network Settings folder – IPv6 Configuration
Network Identification
Use the Network Identification pane to configure the host name and domain name(s) used to
identify the product on the network.
The values for sost name and domain names are retrieved from the firmware, and displayed on this
pane. The Networking firmware determines what host name and domain name(s) to use.
The information under Available Host name / Domain names is for information only and cannot be
modified.
The text entries are disabled under certain circumstances. The following table defines when the
entities are disabled:
Table 2-4 Network Identification pane – Text Entities
Text Entity Disabled status
Host name Disabled if configured by BOOTP
Domain name (IPv4/IPv6) Disabled if configured by BOOTP, DHCPv4, or DHCPv6
ENWW
HP ToolboxFX
51