HP LaserJet Pro CP1520 - Software Technical Reference

IPv6 Configuration
The IPv6 Configuration page shows the status of the IPv6 network configuration settings. This page
is read-only and no settings can be modified here.
Up to seven IPv6 addresses can be shown on this page, depending upon the automatic configuration
of the networking firmware. All available IPv6 addresses are shown.
Figure 2-74 HP EWS, Networking tab – IPv6 Configuration page
Wireless Configuration
Use the Wireless Configuration page to turn off/on the wireless capabilities for the product.
Network Identification
Use the Network Identification pane to configure the Host name and Domain name(s) used to
identify the device on the network.
The values for Host name and Domain names are retrieved from the firmware, and displayed on this
pane. The Networking firmware determines what Host name and Domain name(s) to use.
The information under Available Host name / Domain names is for information only and cannot be
modified.
The text entries are disabled under certain circumstances. The following table defines when the
entities are disabled:
Table 2-8 Network Identification pane – Text Entities
Text Entity Disabled status
Host name Disabled if configured by BOOTP
Domain name (IPv4/IPv6) Disabled if configured by BOOTP, DHCPv4, or DHCPv6
ENWW
HP Embedded Web Server
73