HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer - Software Technical Reference

Paper size
The width and height values can be changed by typing numeric strings into the edit boxes in the
Paper Size group box.
Any entry that is greater than the maximum limits of the width and height control is rounded down to
the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height
control is rounded up to the minimum valid entry.
If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest
whole millimeter. The custom paper-size range maximum is the limit rounded down to the nearest whole
millimeter. Any non-numerical entry reverts to the minimum value. Width and height entries are
validated when the focus has changed.
The resolution of each control is 1 millimeter or 1/10 of an inch, depending on the current
measurement units.
Supported paper sizes
This product supports a number of paper sizes, and it adapts to various media.
NOTE: To obtain best results, select the correct paper size and type in the print driver before printing.
Table 3-1 Supported paper and print media sizes
Size and dimensions Tray 1 Tray 2
and the
optional
500-
sheet
trays
Optional
1,500-sheet
tray
Optional
envelope
feeder
Optional
duplexer
Optional
stacker and
stapler/
stacker
Optional
5-bin
mailbox
Letter
216 x 279 mm (8.5 x 11
in)
A4
210 x 297 mm (8.27 x
11.69 in)
Legal
216 x 356 mm (8.5 x 14
in)
Executive
184 x 267 mm (7.24 x
10.51 in)
(Stacker only)
A5
148 x 210 mm (5.83 x
8.27 in)
(Stacker only)
64 Chapter 3 HP PCL 6 print driver for Windows ENWW