Material Safety Data Sheet

Exposure guidelines USA OSHA (TWA/PEL): 15 mg/m3 (Total Dust), 5 mg/m3 (Respirable Fraction)
ACGIH (TWA/TLV): 10 mg/m3 (Inhalable Particulate), 3 mg/m3 (Respirable Particulate)
Amorphous silica: USA OSHA (TWA/PEL): 20 mppcf 80 (mg/m3)/%SiO2, ACGIH (TWA/TLV): 10
mg/m3
TRGS 900 (Luftgrenzwert) - 10 mg/m3 (Einatembare partikel), 3 mg/m3 (Alveolengängige fraktion)
UK WEL: 10 mg/m3 (Respirable Dust), 5 mg/m3 (Inhalable Dust)
Appropriate engineering
controls
Use in a well ventilated area.
Individual protection measures, such as personal protective equipment
Eye/face protection Not available.
Skin protection
Hand protection Not available.
Other Not available.
Respiratory protection Not available.
Thermal hazards Not available.
9. Physical and chemical properties
Appearance Fine powder
Physical state Solid.
Color Magenta
Odor Slight plastic odor
Odor threshold Not available.
pH Not applicable
Melting point/freezing point Not available.
Initial boiling point and
boiling range
Not applicable
Flash point Not applicable
Evaporation rate Not applicable
Flammability (solid, gas) Not available.
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Not flammable
Flammability limit -
upper (%)
Not available.
Explosive limit - lower
(%)
Not available.
Explosive limit - upper
(%)
Not available.
Vapor pressure
Not applicable
Solubility(ies)
Solubility (water) Negligible in water. Partially soluble in toluene and xylene.
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature Not applicable
Decomposition temperature >= 392 °F (>= 200 °C)
Viscosity
Not applicable
Other information
Percent volatile 0 % estimated
Softening point 176 - 266 °F (80 - 130 °C)
3 / 6
Material name: CF213A
12827 Version #: 04 Revision date: 12-Oct-2015 Issue date: 16-Apr-2015
SDS US