HP LaserJet Enterprise 700 M712 - User Guide

Use Apple AirPrint
Direct printing using Apple’s AirPrint is supported for iOS 4.2 or later. Use AirPrint to print wirelessly to the
product from an iPad (iOS 4.2 or later), iPhone (3GS or later), or iPod touch (third generation or later) in the
following applications:
●
Mail
●
Photos
●
Safari
●
iBooks
●
Select third-party applications
Connect the product to AirPrint
To use AirPrint, the product must be connected to the same wireless network as the Apple device. For more
information about using AirPrint and about which HP products are compatible with AirPrint, go to
www.hp.com/go/airprint.
NOTE: AirPrint does not support USB connections.
You might need to upgrade the product rmware to use AirPrint. Go to www.hp.com/go/lj700M712_rmware.
Find the product AirPrint name
If multiple models of the product are connected to the network, use the AirPrint product name to select the
product from the Apple device.
Use the following steps to nd the AirPrint product name.
1. On the product control panel, press the Home button.
2. Open the following menus:
●
How to Connect
●
Network Address
3. The AirPrint product name is listed in the network addresses.
Print from AirPrint
1. On an Apple device, open the document you want to print, and then tap the Action button.
2. Tap the Print option.
NOTE: If you are using iOS 5 or later and printing photos, the option to select the paper size appears if
more than one tray is loaded with paper.
3. Select the product.
4. Tap the Print button.
ENWW Use Apple AirPrint 101