HP LaserJet Enterprise 700 M712 - User Guide

Change the AirPrint product name
1. In a supported Web browser on your computer, enter the product IP address or host name in the
address/URL eld to open the HP Embedded Web Server.
2. Click the Networking tab, click the TCP/IP Settings option, and then click the Network Identication option.
3. In the Bonjour Service Name eld, type a new name.
4. Click the Apply button.
Solve AirPrint problems
Verify the product supports AirPrint. Go to www.hp.com/go/airprint.
Upgrade the product rmware to use AirPrint. Go to www.hp.com/go/lj700M712_rmware.
Make sure the product is connected to the same wireless network
as the Apple device.
Connect the product to the network using a wireless router or the
wireless accessory installed on the product.
Verify the HP Embedded Web Server is congured for AirPrint. 1. In a supported Web browser on your computer, enter the
product IP address or host name in the address/URL eld to
open the HP Embedded Web Server.
2. Click the Networking tab, and then click the Other Settings
option.
3. Select the following checkboxes:
–
Bonjour
–
AirPrint
–
IPP Printing
4. Click the Apply button.
Make sure the Apple products meet these specications.
●
Apple iOS 4.2 or later
●
iPhone with 3GS or later
●
iPad with iOS 4.2 or later
●
iPod Touch third generation or later
Verify the product is congured so it wakes from Sleep mode
whenever it receives a print job.
1. In a supported Web browser on your computer, enter the
product IP address or host name in the address/URL eld to
open the HP Embedded Web Server.
2. Click the General tab, and then click the Energy Settings
option.
3. In the Sleep Timer Settings area, under the Wake/Auto On
Events option, select the All events item.
4. Click the Apply button.
102 Chapter 5 Print ENWW