HP LaserJet Enterprise 700 M712 - User Guide
Manually congure IPv6 TCP/IP parameters from the control panel
Use the control-panel Administration menus to manually set an IPv6 address.
1. On the product control panel, press the Home button.
2. To enable manual conguration, open the following menus:
●
Administration
●
Network Settings
●
Jetdirect Menu
●
TCP/IP
●
IPV6 Settings
●
Address
●
Manual Settings
●
Enable
Select the On option, and then press the OK button.
3. Select the Address option, and then press the OK button to open a keypad.
4. Use the keypad to enter the address.
5. Press the OK button.
ENWW Congure IP network settings 109