HP LaserJet Pro 400 MFP M425 - User Guide

Set the billing-code setting
1.
From the Home screen on the product control panel, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Scroll to and touch the Billing Codes button, and then touch the On button.
Use billing codes
1. Load the document in the document feeder or on the scanner glass.
2. From the Home screen on the product control panel, touch the Fax button.
3. Enter the fax number, or select a speed-dial or group-dial entry.
4. Touch the Start Fax button.
5. Enter the billing code, and then touch the OK button.
Print the billing-code report
The billing-code report is a printed list of all the fax billing codes and the total number of faxes billed to each
code.
NOTE: After the product prints this report, it deletes all billing data.
1. From the Home screen on the product control panel, touch the Fax button.
2. Touch the Fax Menu button.
3. Touch the Fax Reports button.
4. Scroll to and touch the Print Billing Report button.
ENWW Configure send fax settings 83