HP LaserJet Enterprise Flow MFP M830 - Warranty and Legal Guide
Physical specications
Table 2-1 Physical specications, with toner cartridge
Product Height Depth Width Weight
M830z 1203 mm (47.4 in) 761 mm (30 in) 1103 mm (43.4 in) 136 kg (300 lb)
Table 2-2 Product dimensions with all doors, trays, and document feeder fully opened
Product Height Depth Width
M830z 1593 mm (62.7 in) 1196 mm (47.1 in) 1363 mm (53.7 in)
Table 2-3 Accessory specications
Product Height Depth Width Weight
Stapler/stacker 1093 mm (43 in) 783 mm (30.8 in) 674 mm (26.5 in) 68 kg (150 lb)
Stapler/stacker with
hole punch
1093 mm (43 in) 783 mm (30.8 in) 674 mm (26.5 in) 73 kg (161 lb)
Booklet maker 1093 mm (43 in) 783 mm (30.8 in) 674 mm (26.5 in) 87 kg (192 lb)
Table 2-4 Accessory dimensions with all doors and trays fully opened
Product Height Depth Width
Stapler/stacker 1093 mm (43 in) 783 mm (30.8 in) 1094 mm (43.1 in)
Stapler/stacker with hole
punch
1093 mm (43 in) 783 mm (30.8 in) 1094 mm (43.1 in)
Booklet maker 1093 mm (43 in) 783 mm (30.8 in) 1094 mm (43.1 in)
Power consumption, electrical specications, and acoustic emissions
See www.hp.com/support/ljowMFPM830 for current information.
CAUTION: Power requirements are based on the country/region where the product is sold. Do not convert
operating voltages. This will damage the product and void the product warranty.
Environmental specications
Table
2-5 Operating-environment specications
Environment Recommended Allowed
Temperature 17° to 25°C (62.6° to 77°F) 15° to 30°C (59° to 86°F)
Relative humidity 30% to 70% relative humidity (RH) 10% to 80% RH
Altitude Not applicable 0 to 3048 m (0 to 10,000 ft)
24 Chapter 2 Product specications ENWW