HP LaserJet Enterprise Flow MFP M830-Warranty and Legal Guide
電気通信 (ファックス) 製品向けのその他の規格
通信運用に関する EU ステートメント
この製品は EEA (European Economic Area) の国/地域のアナログ PSTN (Public Switched
Telecommunication Networks) に接続するためのものです。
この製品は EU R&TTE 指令 1999/5/EC (付録 II) の要件に準拠し、それに基づいて CE 認定マークを保有し
ています。
詳細については、本マニュアルの別のセクションに記載されている製造元発行の「適合宣言書」を参
照してください。
国/地域によって PSTN に違いがあるので、この製品がすべての PSTN 端末で機能するかどうかを無条
件に保証することはできません。ネットワークの互換性は PSTN 接続の準備で正しい設定が選択され
たかどうかに依存します。マニュアルに説明されている手順に従ってください。
ネットワークの互換性に問題が発生した場合は、使用装置の購入元、またはお住まいの国/地域の HP
ヘルプデスクにお問い合わせください。
PSTN 端末への接続は、現地の PSTN 業者によって設定されている要件にも左右されます。
New Zealand Telecom Statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that
the item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any
item will work correctly in all respects with another item of Telepermitted equipment of a different make or
model, nor does it imply that any product is compatible with all of Telecom’s network services.
This equipment may not provide for the effective hand-over of a call to another device connected to the
same line.
This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.
This product has not been tested to ensure compatibility with the FaxAbility distinctive ring service for New
Zealand.
Additional FCC statement for telecom products (US)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
back of this equipment is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The REN is used to determine the quantity of devices, which may be connected to the telephone line.
Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In
most, but not all, areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to the line, as determined by the total RENs, contact the telephone company
to determine the maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is
designed to be connected to the telephone network or premises wiring using a compatible modular jack,
which is Part 68 compliant. This equipment cannot be used on telephone company-provided coin service.
Connection to Party Line Service is subject to state tariffs.
JAWW
電気通信 (ファックス) 製品向けのその他の規格
39