HP Color LaserJet Pro MFP M477 - Warranty and legal information
Table Of Contents
- Assistenza e supporto
- Dichiarazione di garanzia limitata HP
- Garanzia di protezione HP: dichiarazione di garanzia limitata per le cartucce del toner LaserJet
- Istruzioni HP per i materiali di consumo non originali HP
- Sito Web HP contro la contraffazione
- Dati memorizzati nella cartuccia del toner
- Contratto di licenza per l'utente finale
- Assistenza in garanzia CSR (Customer Self Repair)
- Assistenza clienti
- Programma di sostenibilità ambientale dei prodotti
- Protezione dell'ambiente
- Emissione di ozono
- Consumo energetico
- Consumo di toner
- Uso della carta
- Materiali in plastica
- Materiali di consumo per stampanti HP LaserJet
- Carta
- Limitazioni relative ai materiali
- Smaltimento delle apparecchiature da parte degli utenti (UE e India)
- Riciclo dell'hardware elettronico
- Informazioni sul riciclaggio dell'hardware in Brasile
- Sostanze chimiche
- Dati di alimentazione del prodotto secondo la normativa 1275/2008 dell'Unione Europea
- Restrizioni relative alla dichiarazione di sostanze nocive (India)
- Restrizioni relative alla dichiarazione di sostanze nocive (Turchia)
- Restrizioni relative alla dichiarazione di sostanze nocive (Ucraina)
- Tabella sostanze (Cina)
- Informazioni utente per etichetta ecologica SEPA (Cina)
- La direttiva sull'implementazione dell'etichetta energetica per la Cina per stampante, fax e copiatr ...
- Material Safety Data Sheet (MSDS, Scheda tecnica di sicurezza)
- EPEAT
- Ulteriori informazioni
- Tabella sostanze (Taiwan)
- Informazioni sulle normative
- Dichiarazione di conformità
- Dichiarazione di conformità
- Dichiarazioni di conformità alle norme
- Norme FCC
- Canada - Dichiarazione di conformità Industry Canada ICES-003
- Dichiarazione VCCI (Giappone)
- Dichiarazione EMC (Corea)
- Istruzioni relative al cavo di alimentazione
- Sicurezza dei prodotti laser
- Dichiarazione sulla sicurezza dei prodotti laser per la Finlandia
- Dichiarazione GS (Germania)
- Conformità eurasiatica (Bielorussia, Kazakstan, Russia)
- Ulteriori dichiarazioni per i prodotti di telecomunicazioni (fax)
- Dichiarazione aggiuntive per il prodotto con rete senza fili
- Dichiarazione di conformità FCC - Stati Uniti
- Dichiarazione per l'Australia
- Dichiarazione ANATEL per il Brasile
- Dichiarazioni per il Canada
- Esposizione alla radiazione di radiofrequenze (Canada)
- Avviso sulle normative dell'Unione Europea
- Avviso per l'utilizzo in Russia
- Avviso per l'utilizzo in Messico
- Dichiarazione per Taiwan
- Dichiarazione per la Corea
- Vietnam Telecom cablato indicato per i prodotti approvati Tipo ICTQC
- Indice analitico

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. If advance notice is not practical, the telephone company
will notify the customer as soon as possible. Also, you will be advised of your right to le a complaint with the
FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could
aect the operation of the equipment. If this happens, the telephone company will provide advance notice in
order for you to make the necessary modications in order to maintain uninterrupted service.
If trouble is experienced with this equipment, please see the numbers in this manual for repair and (or) warranty
information. If the trouble is causing harm to the telephone network, the telephone company may request you
remove the equipment from the network until the problem is resolved.
The customer can do the following repairs: Replace any original equipment that came with the device. This
includes the toner cartridge, the supports for trays and bins, the power cord, and the telephone cord. It is
recommended that the customer install an AC surge arrestor in the AC outlet to which this device is connected.
This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.
Telephone Consumer Protection Act (US)
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device, including fax machines, to send any message unless such message clearly contains, in a
margin at the top or bottom of each transmitted page or on the rst page of the transmission, the date and time
it is sent and an identication of the business, other entity, or individual sending the message and the telephone
number of the sending machine or such business, or other entity, or individual. (The telephone number provided
cannot be a 900 number or any other number for which charges exceed local or long distance transmission
charges).
Industry Canada CS-03 requirements
Notice: The Industry Canada label identies certied equipment. This certication means the equipment meets
certain telecommunications network protective, operational, and safety requirements as prescribed in the
appropriate Terminal Equipment Technical Requirement document(s). The Department does not guarantee the
equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is
permissible for the equipment to be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection. The customer should be aware that
compliance with the above conditions may not prevent degradation of service in some situations. Repairs to
certied equipment should be coordinated by a representative designated by the supplier. Any repairs or
alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment. Users should ensure for their own protection
that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe
system, if present, are connected together. This precaution can be particularly important in rural areas.
ATTENZIONE: Users should not attempt to make such connections themselves, but should contact the
appropriate electric inspection authority, or electrician, as appropriate. The Ringer Equivalence Number (REN) of
this device is shown on the regulatory chassis label.
This product meets the applicable Industry Canada technical specications. / Le présent matériel est conforme
aux specications techniques applicables d’Industrie Canada.
Notice: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the
maximum number of terminals allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer
Equivalence Number of all the devices does not exceed ve (5.0). / L’indice d’équivalence de la sonnerie (IES) sert
à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. La
ITWW Ulteriori dichiarazioni per i prodotti di telecomunicazioni (fax) 43










