HP Designjet 510 Printer Series - Assembly Instructions: Korean

EN
KO
ZHCN
ZHTW
JP
9:9
Close the latch on the printhead cover. The latch may feel
rather stiff, but don’t worry as it needs some pressure to
close it.
9
9:8
When you have replaced all the set-up printheads with
normal printheads, pull the printhead cover down over the
printheads, ensuring that the cover hooks over the latch.
9:7
Insert a new normal printhead ensuring that the colored
label on the printhead corresponds to that on the printhead
slot.
9:6
Remove the tape from the new printheads.
ap.indd 13 9/30/2010 4:09:09 PM