HP Designjet 510 Printer Series - Assembly Instructions: Korean

ZHCN

ZHTW

10:2

At the back of the printer, remove the empty spindle by

pulling rmly on each end as indicated.

9 10 Load a Roll of Paper / / / /

10:1

If your printer has legs, make sure the printer wheels are

locked (the brake lever is pressed down) to prevent the

printer from moving.

The printer will now use a certain amount of paper for

checking and calibration. (If you prefer to use sheet paper,

see the Pocket Guide for loading instructions.)

9:10

Close the window. After the replacement of the set-up

printheads, the printer checks that the normal printheads

are functioning correctly. This may take several minutes.

You will be prompted to accept Printhead Alignment— cor-

rect alignment of the printheads is essential for good-

quality printing. For this you will need to load paper, as

described in the next stages.

ap.indd 14 9/30/2010 4:09:09 PM