HP Designjet 510 Printer Series - Assembly Instructions: Korean

EN
KO
ZHCN
ZHTW
JP
10:10
Follow the prompts (see steps 11 to 13). Try to avoid
touching the paper in the middle (keep your ngers as close
as possible to each edge). Handle glossy paper by the
edges or wear cotton gloves. Skin oils can interact with the
ink and cause it to smear.
10
10:7
A front-panel message prompts you to load paper to align
the printheads. Press the Enter key.Then, as above left, select
Load roll (or Load sheet, if you prefer–see the Pocket Guide
for loading instructions) and press Enter. Using the or
keys, select the type of paper loaded (see above right) and
press the Enter key. (If in doubt, you should nd the ‘type’ of
the paper on its box.)
10:9
From the front of the printer lean over the top and feed the
paper towards you into the slot at the back of the printer,
as shown here. (You may nd it easier if the paper bin is
pushed back out of the way.)
10:8
Lift the blue paper-load lever.
ap.indd 16 9/30/2010 4:09:11 PM