HP Designjet 510 Printer Series - Assembly Instructions: Korean

EN
KO
ZHCN
ZHTW
JP
10:15
The printer will now print its alignment pattern, using the paper you have loaded. If there is a problem print-
ing, check the front panel error messages. Explanations of these messages are in the Pocket Guide.
You should not cancel the alignment print as correct alignment of the printheads is essential for good-quality
printing. You may also be prompted to let the printer perform its Color Calibration routine. Again, don’t
cancel this as it will help ensure that the colors printed are best for the paper you have loaded. Printhead
Alignment and Color Calibration are different processes and should both be done when required. They are
briey described in the Pocket Guide and more fully in the online User’s Reference Guide.
If you have purchased a network card, for connecting your printer to a local area network (LAN), now is
a good time to install it—see Stage 12. Also install now any HP-GL/2 Accessory card and any additional
memory for your Accessory card. See the instructions packaged with these items for full information on how
to install them. The HPL/2 Accessory card is installed in much the same way as a LAN card, as in Stage 12.
See Stage 12 for connecting a LAN cable.
10 11 Understand Printer Connections / /
/ /
ap.indd 18 9/30/2010 4:09:13 PM